A bounding surface model for anisotropically overconsolidated clay incorporating thermodynamics admissible rotational hardening rule     

Yanni Chen  Zhongxuan Yang 《国际地质力学数值与分析法杂志》2020,44(5):668-690

A bounding surface model is formulated to simulate the behavior of clays that are subject to an anisotropic consolidation stress history. Conventional rotational hardening is revisited from the perspective of thermodynamics. As the free energy cannot be accumulated infinitely upon critical state failure, the deviatoric back stress must vanish. This requires the rotated yield surface to be turned back to eventually align on the hydrostatic axis in the stress plane. Noting that most of the previous propositions violate this restriction, an innovative rotational hardening rule is formulated that is thermodynamically admissible. The bounding surface framework that employs the modified yield surface is applied to simulate elastoplastic deformations for overconsolidated clays, with which the overprediction of strength on the “dry” side can be greatly improved with reasonable results. Other important features, including contractive or dilative response and hardening or softening behavior, can also be well-captured. It has been shown that the model can simulate three types of reconstituted clays that are sheared with initial conditions over a wide range of anisotropic consolidation stress ratios and overconsolidation ratios under both triaxial undrained and drained conditions. Limitations and potential improvement of the model regarding the fabric anisotropy at critical state have been discussed.  相似文献   

基于VG模型确定土水特征曲线基本参数     

潘登丽  倪万魁  苑康泽  张镇飞  王熙俊 《工程地质学报》2020,28(1):69-76

土水特征曲线基本参数(进气值、残余吸力值和反弯点的斜率等)在非饱和土的强度理论、渗流理论以及体变特性等方面都是非常重要的参数,常常通过传统画图法来确定,其精确度难以保证。以洛川标准剖面4层原状黄土为研究对象,基于VG模型提出单峰和双峰SWCC基本参数的确定方法;采用滤纸法测得SWCC数据点,基于VG模型进行最优化拟合,获取拟合参数,利用单峰和双峰SWCC数据点验证该方法的可行性;进行自然状态下的水分蒸发试验,根据质量含水率与蒸发时间的关系确定蒸发残余饱和度Srzf,依据Sr1、Sr2(Sr1和Sr2分别由确定残余状态的两种方法得到)与Srzf的相对误差值,比较了两种确定残余状态的方法。结果表明:对于单峰和双峰SWCC曲线,该方法都可以得到合理的基本参数并有效地确定其残余状态。  相似文献   

三疣梭子蟹几丁质酶基因(PtCht6)的克隆及其在免疫中的功能分析     

宋柳  吕建建  王磊  孙东方  刘萍 《海洋与湖沼》2019,50(5):1080-1090

几丁质酶(chitinase)在甲壳动物的蜕皮、消化和免疫等很多生物学过程中发挥重要功能,为深入探讨几丁质酶的免疫防御机制,本实验利用RACE技术克隆了三疣梭子蟹(Portunus trituberculatus)PtCht6基因。该基因cDNA全长2736bp,开放阅读框(ORF)2103bp,编码700个氨基酸,具有几丁质酶GH18家族典型特征。利用实时荧光定量技术分析PtCht6在三疣梭子蟹不同组织、不同蜕皮阶段、不同病原感染以及低盐胁迫(11)下的表达特征,结果显示:PtCht6在各组织中均有表达且在肝胰腺中的表达量最高;在不同蜕皮时期的肝胰腺中,其表达量由蜕皮后期(A/B)、蜕皮间期(C)、蜕皮前期(D)依次递减(P0.05);人工感染WSSV和副溶血弧菌后.PtCht6的表达量在肝胰腺中分别于12h、72h达到最大值,在血细胞中均于12h达到最大值,且相较于对照组,整体显著上调表达(P0.05);低盐胁迫能够显著抑制该基因的表达,最高抑制73倍(P0.05)。同时发现,低盐环境下感染WSSV后,该基因达到峰值的时间明显延迟(至少延迟12h.P0.05)。该研究结果预示PtCht6作为免疫因子参与三疣梭子蟹的病原防御,且低盐胁迫在一定程度上抑制了该基因的免疫功能。  相似文献   

A study of coral reef resilience and implications of adaptive management and rehabilitation in Khanh Hoa Province, Vietnam     

VO Si Tuan  HUA Thai Tuyen  PHAN Kim Hoang 《海洋学报(英文版)》2019,38(1):112-117

The Province of Khanh Hoa, Vietnam, is located in the western South China Sea and boasts a shoreline of 385 km and many islands. Previous studies have indicated the extreme diversity and abundance of coral reefs in its waters as compared with other coastal provinces of Vietnam. A study on the resilience of coral reefs against increased surface water temperature and anthropogenic impact is conducted at 19 reef sites in 2015. At each site, a series of parameters (e.g., coral covers, genus diversity, and coral recruitment, substratum heterogeneity, depth, water exchange level, and sediment deposit and water temperature) are measured quantitatively or semi-quantitatively. The measured data are rated based on the relationship between the parameter values and coral susceptibility; the consideration that reef health reflects the biological capability to adapt to environmental changes and the recruitment potential if bleached; and positive or negative influences of physical factors in the mitigation of thermal stress and protecting corals from bleaching. A cumulative analysis enables researchers to divide the studied reefs into four categories based on varying levels of reef health to support resilience, recovery, and vulnerability in the case of increased water temperature. Relevant management interventions for each category and other supporting activities are suggested to enhance management effectiveness and to plan the rehabilitation of coral reefs for biodiversity conservation and touristic development, taking into account the involvement of related stakeholders.  相似文献   

Inference of in situ stress from thermoporoelastic borehole breakouts based on artificial neural network     

Hua Zhang  Shunde Yin 《国际地质力学数值与分析法杂志》2019,43(16):2493-2511

The determination of in situ stresses is very important in petroleum engineering. Hydraulic fracturing is a widely accepted technique for the determination of in situ stresses nowadays. Unfortunately, the hydraulic fracturing test is time-consuming and expensive. Taking advantage of the shape of borehole breakouts measured from widely available caliper and image logs to determine in situ stress in petroleum engineering is highly attractive. By finite element modeling of borehole breakouts considering thermoporoelasticity, the authors simulate the process of borehole breakouts in terms of initiation, development, and stabilization under Mogi-Coulomb criterion and end up with the shape of borehole breakouts. Artificial neural network provides such a tool to establish the relationship between in situ stress and shape of borehole breakouts, which can be used to determine in situ stress based on different shape of borehole breakouts by inverse analysis. In this paper, two steps are taken to determine in situ stress by inverse analysis. First, sets of finite element modeling provide sets of data on in situ stress and borehole breakout measures considering the influence of drilling fluid temperature and pore pressure, which will be used to train an artificial neural network that can eventually represent the relationship between the in situ stress and borehole breakout measures. Second, for a given measure of borehole breakouts in a certain drilling fluid temperature, the trained artificial neural network will be used to predict the corresponding in situ stress. Results of numerical experiments show that the inverse analysis based on finite element modeling of borehole breakouts and artificial neural network is a promising method to determine in situ stress.  相似文献   

Current-induced scour beneath initially elevated subsea pipelines     

《Applied Ocean Research》2019

When a subsea pipeline is laid on an uneven seabed, certain sections may have an initial elevation with respect to the far-field seabed, e_o, and thus potentially affecting the on-bottom stability of the pipeline. This paper focuses on quantifying the effects of the upstream dimensionless seabed shear stress, θ_∞, and Reynolds number, Re, on: (1) the maximum dimensionless seabed shear stress beneath the pipe, θ_max, to be compared to the critical shear stress in order to determine whether scour would occur and progress towards an equilibrium state; and, (2) the dimensionless equilibrium scour depth beneath the pipe, S_eq/D. Using a 2-D Reynolds averaged Navier-Stokes (RANS) approach along with the k-ω Shear Stress Transport (SST) turbulence model, a parametric study involving 243 computational fluid dynamics (CFD) simulations was conducted. The simulation results were used to develop a closed-form equation for the prediction of θ_max. Subsequently, experimental measurements of S_eq/D have been compiled from published literature, to develop a new closed-form equation for the prediction of S_eq/D with a high correlation to the experimental data. In summary, we present two closed-form equations for the prediction of θ_max and S_eq/D for pipelines with an initial e_o/D, which are applicable for both clear-water and live-bed conditions. The effects of θ_∞ and Re have been included, albeit Re having a small influence as compared to the other parameters.  相似文献   

A smoothed cap model for variably saturated soils and its robust numerical implementation          下载免费PDF全文

P. Gamnitzer  G. Hofstetter 《国际地质力学数值与分析法杂志》2015,39(12):1276-1303

This paper deals with the numerical implementation of a cap model for unsaturated soils. It provides a brief review of existing cap model approaches, based on which an improved model formulated in terms of generalised effective stress and matric suction is derived and described in detail. Although the proposed model is a multisurface plasticity model, it can efficiently be implemented using only single‐surface projections because of the smoothness of the model, which is obtained by construction. Numerical algorithms are provided for these single‐surface stress projections, using a single‐equation approach whenever possible. The robustness of the utilised single‐equation approaches is enhanced by proposing problem‐fitted start‐up procedures based on investigations of the nonlinear projection equations. A comparison of the model response with extensive material test data is used to validate the model and to demonstrate the robust application of the approach to silty sands and low to medium plasticity clays. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

The effective stress concept and the evaluation of changes in pore air pressure under jacketed isotropic compression tests for dry sand based on the 2‐phase porous theory          下载免费PDF全文

Sayuri Kimoto  Fusao Oka  Yasuhiro Morimoto 《国际地质力学数值与分析法杂志》2017,41(18):1894-1907

The effective stress concept for solid‐fluid 2‐phase media was revisited in this work. In particular, the effects of the compressibility of both the pore fluid and the soil particles were studied under 3 different conditions, i.e., undrained, drained, and unjacketed conditions based on a Biot‐type theory for 2‐phase porous media. It was confirmed that Terzaghi effective stress holds at the moment when soil grains are assumed to be incompressible and when the compressibility of the pore fluid is small enough compared to that of the soil skeleton. Then, isotropic compression tests for dry sand under undrained conditions were conducted within the triaxial apparatus in which the changes in the pore air pressure could be measured. The ratio of the increment in the cell pressure to the increment in the pore air pressure, m, corresponds to the inverse of the B value by Bishop and was obtained during the step loading of the cell pressure. In addition, the m values were evaluated by comparing them with theoretically obtained values based on the solid‐fluid 2‐phase mixture theory. The experimental m values were close to the theoretical values, as they were in the range of approximately 40 to 185, depending on the cell pressure. Finally, it was found that the soil material with a highly compressible pore fluid, such as air, must be analyzed with the multi‐phase porous mixture theory. However, Terzaghi effective stress is practically applicable when the compressibilities of both the soil particles and the pore fluid are small enough compared to that of the soil skeleton.  相似文献   

Energy partitioning over a semi‐arid shrubland in northern China          下载免费PDF全文

X. Jia  T. S. Zha  J. N. Gong  B. Wu  Y. Q. Zhang  S. G. Qin  G. P. Chen  W. Feng  S. Kellomäki  H. Peltola 《水文研究》2016,30(6):972-985

During the last decade, the widely distributed shrublands in northern China have shown significant signs of recovery from desertification, the result of widespread conservation practices. However, to support the current efforts in conservation, more knowledge is needed on surface energy partitioning and its biophysical controls. Using eddy‐covariance measurements made over a semi‐arid shrubland in northwest China in 2012, we examined how surface energy‐balance components vary on diurnal and seasonal scales, and how biophysical factors control bulk surface parameters and energy exchange. Sensible heat flux (H) exceeded latent heat flux (λE) during most of the year, resulting in an annual Bowen ratio (β, i.e. H/λE) of 2.0. λE exceeded H only in mid‐summer when frequent rainfall co‐occurred with the seasonal peak in leaf area index (LAI). Evapotranspiration reached a daily maximum of 3.3 mm day^?1, and summed to 283 mm yr^?1. The evaporative fraction (EF, i.e. λE/R_n), Priestley–Taylor coefficient (α), surface conductance (g_s) and decoupling coefficient (Ω) were all positively correlated with soil water content (SWC) and LAI. The direct enhancement of λE by high vapour pressure deficit (VPD) was buffered by a concurrent suppression of g_s. The g_s played a direct role in controlling EF and α by mediating the effects of LAI, SWC and VPD. Our results highlight the importance of adaptive plant responses to water scarcity in regulating ecosystem energy partitioning, and suggest an important role for revegetation in the reversal of desertification in semi‐arid areas. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Limitations of suction‐controlled triaxial tests in the characterization of unsaturated soils          下载免费PDF全文

X. Zhang 《国际地质力学数值与分析法杂志》2016,40(2):269-296

Behavior of unsaturated soils is influenced by many factors, and the influences of these factors are usually coupled together. Suction‐controlled triaxial (SCTX) tests are considered to allow researchers to investigate influences of individual variables on unsaturated soils under specified stress path with controls of stresses, pore water, and air pressures. In the past 50 years, SCTX testing method has been established as a standard approach to characterize constitutive behavior of unsaturated soils. Most important concepts for modern unsaturated soil mechanics were developed upon results from the SCTX tests. Among these, one of the most important contributions in the constitutive modeling of elasto‐plastic behavior for unsaturated soils is the Barcelona basic model (BBM) proposed by Alonso et al. in 1990. The BBM successfully explained many features of unsaturated soils and received extensive acceptance. However, the SCTX tests are designed based upon the divide‐and‐conquer approach in which an implicit assumption is used: soil behavior is stress‐path independent. However, it is well‐established that unsaturated soil behavior is elasto‐plastic and stress‐path dependent. It is found that the SCTX tests in fact cannot control the stress path of an unsaturated soil during loading. This incapability, in combination with complicated loading/collapse behavior of unsaturated soils, makes the SCTX tests for characterizing unsaturated soil questionable. This paper discusses the limitations of the SCTX tests in the characterization of unsaturated soils. A possible solution to the problem was proposed based on a newly developed modified state surface approach. The discussions are limited for isotropic conditions. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献